1.The hot air gun adopts a brushless vortex blower, with adjustable air volume and a wide range. The soldering iron adopts 210,245 and 115 soldering iron handles, which heat up quickly.
2.Both the hot air gun and the soldering iron have three temperature channels: CH1,CH2, and CH3. And the parameters of each channel can be set separately.
3.The air gun has a cold air function and can be applied in special scenarios.
1.The air gun of the air pump type is used, which has a large air volume and is very quiet. The 8521P model uses a handle fan for air output, while the 8624 model is blown out from the main unit through the handle pipe by the air pump. Compared with the F5 and 861 types, it has a larger air volume. However, in terms of air pumps, this one is indeed very quiet. If compared with the F5 and others.
2. The soldering iron is equipped with a 210 handle and a soldering tip, making it suitable for precise repairs of mobile phone motherboards and other components. This is an upgrade among 2-in-1 products, as most of the 2-in-1 products in the industry still use 936 soldering irons.
3. It is equipped with temperature storage function. The air gun end has 3 wind force and temperature storage, and the soldering iron end has 3 temperature storage.
4. The air gun and soldering iron can be used simultaneously or one of them can be turned off separately.
5. Indicator light (which will change color) indicates the status: heating up/reaching a constant temperature.
Air volume range: 10600L/min